How to protect your sprinkler system during winter
Protecting your sprinkler system is among the first things you think of as winter approaches at the end of October. To avoid having damaged sprinklers and valves after winter, you must cover the sprinklers and pipes to make sure they are not negatively affected by the cold.
You should use plastic papers and wrap them around the sprinklers and valves, then fasten them using insulation tape. Remember to secure all other machines that can be destroyed by the cold winter air.
In this article, You’ll learn how to protect your sprinkler system during winter.
How a sprinkler system works
Most sprinklers have external links in the garden or lawn. While some valves are underground, others are situated on the ground. It is divided into several zones where each feeder leads to a sprinkler in the zone. The zones are controlled by valves that receive signals from the controller.
Due to constant on-off cycles, the valves start to wear away, and you are likely to do some repairs on them. If you are in search of a sprinkler repair Denver – based or any other location, make sure you hire a reputable expert to do it for you to ensure future problems do not occur.
Why you should protect your sprinkler
Sprinklers need maintenance and protection from harsh weather all the time. Maintain your sprinkler at least after a fortnight and just before winter, which is at the end of October. Clean the sprinklers’ heads and glass to remove dirt. Regular cleaning makes them flexible and helps keep them in the right position. They should be covered with plastic papers during the winter.
How to protect your sprinkler during winter
To protect your sprinkler system from damage, you will be required to do the following.
- Shut off the water supply to the irrigation system. You can either use the manual or the automatic process to drain the water. It depends on the type of system you are using. This is to make certain that no water remains in the pipeline. If this happens, then the water in the pipes can freeze, thus bursting the valves.
- The main shut-off must be protected from cold air, wrap up in plastic wrap using insulation tapes. Turn it off and if it’s automatic, put it in “rain mode” throughout the winter. This allows you to power down the timer without losing programmed information. You will also save on energy costs.
- Finally, wrap up the sprinklers and any valves that are visible with plastic bags and secure them with insulation tapes.
A final word of advice
During the winter, don’t take anything for granted. Make sure to check the sprinklers to ensure that no snow is seeping throw the plastic wraps. Change those that are leaky and ensure that your sprinklers are dry. Avoid the expenses of repairing your sprinkler system when spring comes—taking the necessary measures before winter will save you the tough hustle and costs of repairing or replacing your system.